IRIG106wiki

This is an old revision of the document!

DOCUMENT 106-19 TELEMETRY STANDARDS (JULY 2017) Prepared by: Telemetry Group, Range Commanders Council Published by: Secretariat, Range Commanders Council, White Sands Missile Range, New Mexico, 88002
Cover, Preface, Table of Contents, and Summary of Changes
CHAPTERS
1.	Introduction
2.	Transmitter and Receiver Systems
3.	Frequency Division Multiplexing Telemetry Standards
4.	Pulse Code Modulation Standards
5.	Digitized Audio Telemetry Standard
6.	Recorder & Reproducer Command and Control
7.	Packet Telemetry Downlink
8.	Digital Data Bus Acquisition Formatting Standard
9.	Telemetry Attributes Transfer Standard
10.	Digital On-board Recorder Standard
11.	Recorder Data Packet Format Standard
21.	Telemetry Network Standard Introduction
22.	Network-Based Protocol Suite
23.	Metadata Configuration XML Schema MDL Examples MDL Relationships
24.	Message Formats TSS Reference Applications
25.	Management Resources Management Resource Matrix (Excel) Management Resource Matrix (CSV) Management Resource Matrix (JSON) Management Resource Matrix (HTML) Management Resource Matrix (HTML with JavaScript) Management Resource Matrix (Dynamic HTML) Management Resource Matrix (SNMP MIB) Management Resource Matrix Tools
26.	TmNSDataMessage Transfer Protocol
27.	Radio Frequency Network Access Layer TmNS Link Calculator RAN Bandwidth Calculator TmNS Data Rate Calculations
28.	Radio Frequency Network Management
ANNEXES
A.1	Pulse Amplitude Modulation Standards
A.2	Magnetic Tape Recorder and Reproducer Information and Use Criteria
A.3	ADARIO Data Block Field Definitions
A.4	Asynchronous Recorder Multiplexer Output Reconstructor (ARMOR)
IRIG 106-19_Telemetry_Standards.pdf

Beginning with RCC 106-17, the appendixes that were previously stand-alone documents are now integrated with the chapters that cover the same material. This does not include four appendixes that are retired but maintained for historical purposes; these four remain stand-alone files and are renamed as annexes. The following lists new locations for the appendixes.

APPENDIXES
Appendix A - Frequency Considerations for Telemetry	Chapter 2, Appendix 2-A
Appendix B - Use Criteria for Frequency Division Multiplexing	Chapter 3, Appendix 3-A
Appendix C - PCM Standards (Additional Information and Recommendations)	Chapter 4, Appendix 4-A
Appendix D - Magnetic Tape Recorder and Reproducer Information and Use Criteria	Annex A.2
Appendix E - Deleted (Available Transducer Documentation)	none
Appendix F - Continuously Variable Slope Delta Modulation	Chapter 5, Appendix 5-A
Appendix G - ADARIO Data Block Field Definitions	Annex A.3
Appendix H - Application of the Telemetry Attributes Transfer Standard	Chapter 9, Appendix 9-A
Appendix I - Telemetry Attributes Transfer Standard Cover Sheet	Chapter 9, Appendix 9-B
Appendix J - Telemetry Attributes Transfer Standard Format Example	Chapter 9, Appendix 9-C
Appendix K - Pulse Amplitude Modulation Standards	Annex A.1
Appendix L - Asynchronous Recorder Multiplexer Output Reconstructor (ARMOR)	Annex A.4
Appendix M - Properties of the Differential Encoder Specified in IRIG Standard 106 for OQPSK Modulations	Chapter 2, Appendix 2-B
Appendix N - Telemetry Transmitter Command and Control Protocol	Chapter 2, Appendix 2-C
Appendix O - Floating Point Formats	Chapter 9, Appendix 9-D
Appendix P - Derived Parameter Specification	Chapter 9, Appendix 9-E
Appendix Q - Extended Binary Golay Code	Chapter 7, Appendix 7-A
Appendix R - Low-Density Parity Check Code for Telemetry Systems	Chapter 2, Appendix 2-D
Appendix S - Space-Time Coding for Telemetry Systems	Chapter 2, Appendix 2-E