Differences

This shows you the differences between two versions of the page.

--- ch10_handbook:pcm_data [2014/04/13 17:38] – created bob
+++ ch10_handbook:pcm_data [2014/07/16 02:04] (current) – Corrected Sync offset applicability from packed to unpacked mode. Planned CH10 updates will probably require this for Packed and unpacked mode christianr
@@ Line 1: / Line 1: @@
+~~ODT~~
 ===== PCM DATA =====
@@ Line 28: / Line 29: @@
  The layout of the CSDW is shown in Figure 6-16. The uSyncOffset field is the value
 of the byte offset into a major frame for the first data word in a packet, and is only valid in
-Packed Mode. The bUnpackedMode, bPackedMode, and bThruMode flags indicate
+Unpacked Mode. The bUnpackedMode, bPackedMode, and bThruMode flags indicate
 Unpacked Mode, Packed Mode, and Throughput Mode respectively and are mutually exclusive.
 The bAlignment flag indicates 16 or 32-bit alignment of minor frames and minor frame fields.
@@ Line 54: / Line 55: @@
     }
 </code>
-**Type 0x09 PCM Data Format 1 CSDW**
+<html><center><b>
+Type 0x09 PCM Data Format 1 CSDW
+</b></center></html>
 The optional intra-packet header and individual PCM minor frame messages follow the
@@ Line 81: / Line 84: @@
 </code>
-**Type 0x09 PCM Data Format 1 intra-packet data header**
+<html><center><b>
+Type 0x09 PCM Data Format 1 intra-packet data header
+</b></center></html>
 One minor frame of data follows the intra-packet data header. The length of the minor