IRIG106wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~ODT~~
===== CONFORMANCE TO IRIG 106 =====

Chapter 10 of the IRIG 106 standard sets forth requirements for digital recorders. 
Paragraph 10.3.1 summarizes requirements for a recorder to be considered 100 percent compliant 
with the standard. A number of features described in Chapter 10 are considered optional. 
Optional features are not required to be implemented; however, if they are implemented, they 
must be in accordance with the Chapter 10 standard. 
 
Rather than reiterate all the requirements of Chapter 10, the tables below present 
a brief outline of the major requirement areas, as well as those portions of Chapter 10 that have 
been identified as optional. 

^  PHYSICAL INTERFACE REQUIREMENTS  ^^^^
^  Ch 10 Section  ^  Required  ^  Optional  ^  Physical Interfaces  ^
| 10.3, 10.4.1 |  See Note  | | **Recorder Fibre Channel** |
| 10.4.2          |  ✔  | | - Fibre Channel SCSI |
| 10.4.1          |  ✔  | | - Data Download |
| 10.3.11         | |  ✔  | - Data streaming |
| 10.3.8, 10.7    | |  ✔  | - Configuration with TMATS |
| 10.7.1          | |  ✔  | - Recorder Control and Status |
| 10.4.2          |  See Note  | | **Recorder IEEE 1394B** |
| 10.4.2.2        |  ✔  | | - SCSI/SBP-2 |
| 10.4, 10.9      |  ✔  | | - Data Download |
| 10.3.11         | |  ✔  | - Data streaming |
| 10.3.8, 10.7    | |  ✔  | - Configuration with TMATS |
| 10.7.1          | |  ✔  | - Recorder control and status |
| 10.4, 10.4.3    |  See Note  | | **Recorder Ethernet (on board)** |
| 10.4            |  ✔  | | - Data Download |
| 10.3.11         | |  ✔  | - Data streaming |
| 10.3.8, 10.7    | |  ✔  | - Configuration with TMATS |
| 10.7.1          | |  ✔  | - Recorder Control And Status |
| 10.3.5, 10.3.6  | |  ✔  | **Removable Memory Media (RMM)** |
| 10.9.5          | | | - IEEE 1394B Bilingual Socket |
| 10.9            |  ✔  | | - IEEE 1394B SCSI/SBP-2 |
| 10.4, 10.9      |  ✔  | | - Data Download |
| 10.3.8, 10.7    | |  ✔  | - Configuration with TMATS |
| 10.3.2, 10.7.10 | |  ✔  | **Discrete Lines** |
| 10.7.10         |  ✔  | | - Recorder control and status |
| 10.3.2          |  ✔  | | **RS-232 and 422 Full Duplex Communication** |
| 10.7            |  ✔  | | - Configuration with TMATS |
| 10.7            |  ✔  | | - Recorder Control And Status |
| 10.3            |  ✔  | | **External Power Port** |
| Note: Either Fibre Channel or IEEE 1394B is required for on-board recorders; other network interfaces are optional. Ethernet is required for ground-based recorders; other network interfaces are optional. ||||

^  LOGICAL INTERFACE REQUIREMENTS  ^^^^
^  Ch 10 Section  ^  Required  ^  Optional  ^  Logical Interfaces  ^
| 10.5 |  ✔  | | **Media File Interface** |
| 10.5 |  ✔  | | - Directory & File Table Entries |
| 10.3.7 | |  ✔  | - STANAG fields - File Size, File Create Date, File Close Time |
| 10.6 |  ✔  | | **Packetization & Data Format** |
| 10.6.1 | |  ✔  | - Secondary header |
| 10.6.1 | |  ✔  | - Filler for packet length |
| 10.6.1 | |  ✔  | - Data checksum |
| 10.6.1 | |  ✔  | - Intrapacket headers and time stamps |