IRIG106wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Compile up using your favorite compiler suite. For MSVC 6 use the "irig106.dsw"
work space.  For MSVC .NET use the "irig106.sln" solution file.  For GCC (on Linux
or DJGPP) use "make".

Reading files involves opening the file, reading a data packet header, 
optionally read the data packet (which may contain multiple data messages), 
decode the data packet, and then loop back and read the next header.  The 
routines for handling data packets are in "irig106ch10".  Routines for decoding 
each data packet type are contained in their own source code modules.  For 
example, 1553 decoding is contained in "i106_decode_1553f1".  Below is a 
simplified example of message processing...

<code>
    enI106Ch10Open(&iI106Ch10Handle, szInFile, I106_READ);

    while (1==1) 
        {

        enStatus = enI106Ch10ReadNextHeader(iI106Ch10Handle, &suI106Hdr);

        if (enStatus == I106_EOF) return;

        enStatus = enI106Ch10ReadData(iI106Ch10Handle, &ulBuffSize, pvBuff);

        switch (suI106Hdr.ubyDataType)
            {

            case I106CH10_DTYPE_1553_FMT_1 :    // 0x19

                enStatus = enI106_Decode_First1553F1(&suI106Hdr, pvBuff, &su1553Msg);
                while (enStatus == I106_OK)
                    {
                    Do some processing...
                    enStatus = enI106_Decode_Next1553F1(&su1553Msg);
                    }
                break;
            default:
                break;
            } // end switch on message type

        }  // End while

    enI106Ch10Close(iI106Ch10Handle);
</code>